Что такое максимальная позиция, максимальное кредитное плечо и начальное соотношение маржи?
- Максимальное кредитное плечо зависит от номинальной стоимости позиции — чем больше позиция, тем ниже допустимое кредитное плечо. Вы можете настроить кредитное плечо в соответствии с вашими потребностями. Размер всех позиций рассчитывается на основе номинальной стоимости контракта. Таким образом, начальная маржа определяется выбранным вами кредитным плечом.
- Примечание: Вы должны выбрать кредитное плечо до открытия позиции (и соответствовать требованиям начальной маржи). Чем выше кредитное плечо, тем ниже номинальная стоимость, которую вам разрешено открыть; чем ниже кредитное плечо, тем выше номинальная стоимость, которую вам разрешено открыть.
Система покажет максимальный допустимый размер позиции для разных уровней кредитного плеча, как показано на диаграмме ниже:
What Is Maintenance Margin?
Maintenance margin is a critical term in trading, especially in futures trading. It refers to the minimum amount of margin that a user must maintain in their account to keep their leveraged positions. The maintenance margin is calculated based on the level of the nominal value of the user's position.
Maintenance Margin = Nominal Value of Position * Maintenance Margin Rate - Maintenance Margin Amount
- Refer to leverage and margin to get the latest information about the nominal value of the position, maximum leverage, corresponding maintenance margin rate, and maintenance amount.
- The maintenance margin is calculated according to the tier of the nominal value of the position. This means that regardless of the leverage level you choose, the calculation method for maintenance margin remains the same for the same nominal value tier. Increasing the nominal value tier does not affect the leverage for previous tiers. The larger the position, the higher the maintenance margin rate.
- At BitMart Exchange, the maintenance margin is typically half of the initial margin.
- It is important to note that the maintenance margin directly impacts the liquidation price. To avoid auto-deleveraging, it is strongly recommended that you close your position before your collateral falls below the maintenance margin.
Maintenance Margin Rate
- The maintenance margin calculation is set by "tiers". Regardless of your leverage adjustments, the method of calculating the maintenance margin does not change. Even if there are changes in the tiers, it will not affect the leverage of previous tiers. To avoid automatic liquidation, you should close your position before your collateral falls below the maintenance margin.
- If your position is in cross margin mode, you can use the [Adjust Leverage] button to increase or decrease the leverage.
- If your position is in isolated margin mode, you cannot decrease the leverage.
Комментарии
0 комментариев
Статья закрыта для комментариев.